Panasonic KX-TG7341NZ User Manual

44

If you still have difficulties after following the instructions in this section, disconnect 
the base unit’s AC adaptor and turn off the handset, then reconnect the base unit’s 
AC adaptor and turn on the handset.

The unit does not work.

L

Make sure the batteries are installed correctly 
(page 12).

L

Fully charge the batteries (page 13).

L

Check the connections (page 11).

L

Unplug the base unit’s AC adaptor to reset the 
unit and turn off the handset. Reconnect the 
adaptor, turn on the handset and try again.

L

The handset has not been registered to the 
base unit. Register the handset (page 26).

I cannot hear a dial tone.

L

The base unit’s AC adaptor or telephone line 
cord is not connected. Check the connections.

L

If you are using a splitter to connect the unit, 
remove the splitter and connect the unit to the 
wall socket directly. If the unit operates 
properly, check the splitter.

L

Disconnect the base unit from the telephone 
line and connect the line to a known working 
telephone. If the working telephone operates 
properly, contact our service personnel to 
have the unit repaired. If the working 
telephone does not operate properly, contact 
your service provider/telephone company.

I do not know how to erase y 
(Missed call) from the display.

L

There are unviewed missed calls remaining. 
View them and erase y in the following way.

K

 (middle soft key)

{V}

/{^}: “Caller List” i M

Press {V} to search from the most recent 
call, or press {^} to search from the oldest 
call.

TG7341NZ(e).book  Page 44  Wednesday, September 3, 2008  11:37 AM