Panasonic KX-TG1822AL User Manual
SMS (Short Message Service)
42
– Message Centre 2: 01983391
Message Centre 1 is used for sending SMS
messages, and Message Centre 2 is used
for receiving messages.
Message Centre 1 is used for sending SMS
messages, and Message Centre 2 is used
for receiving messages.
L
Consult your service provider for more
information.
information.
1
Press {j/OK}.
2
Select “SMS”, then press {>}.
3
Select “Public”, then press {>}.
4
Select “Settings”, then press {>}.
5
Enter “0000” (default base unit PIN).
L
L
If you changed the PIN, enter it (page
36).
36).
6
Select “Message Centre1” or
“Message Centre2”, then press {>}.
“Message Centre2”, then press {>}.
7
Edit the number as necessary, then
press {j/OK}.
press {j/OK}.
8
Select “Save”, then press {>}.
9
Press {ih}.
Note:
L
If your phone is connected to a PBX, you
need to add the PBX line access number
and a dialling pause to the beginning of
the Message Centre 1 phone number.
need to add the PBX line access number
and a dialling pause to the beginning of
the Message Centre 1 phone number.
Sending a message
Writing and sending a new
message
1
message
1
Press {j/OK}.
2
Select “SMS”, then press {>}.
3
To access the public mailbox
Select “Public”, then press {>}.
To access a private mailbox
Select the desired mailbox, press {>},
then enter its password.
Select “Public”, then press {>}.
To access a private mailbox
Select the desired mailbox, press {>},
then enter its password.
4
Select “Create”, then press {>}.
L
If “^Use Last Text?” is displayed,
you can use the text from the last
message you created by pressing
{e}
you can use the text from the last
message you created by pressing
{e}
. This message will be displayed
5
Enter the message (page 47), then
press {j/OK}.
press {j/OK}.
6
Enter the destination phone number (20
digits max.), then press {j/OK}.
digits max.), then press {j/OK}.
L
To send the message to a party saved
in the handset phonebook, press
{k}
in the handset phonebook, press
{k}
, select the handset phonebook
entry, then press {j/OK} 2 times.
L
To send the message to a party logged
in the caller list, press {e} or {v}
repeatedly to select the party, then
press {j/OK} 2 times.
in the caller list, press {e} or {v}
repeatedly to select the party, then
press {j/OK} 2 times.
L
To send the message to a phone
number logged in the redial list, press
{R}
number logged in the redial list, press
{R}
repeatedly to select the phone
number, then press {j/OK} 2 times.
L
If you wish to send the message to the
other party’s mailbox, enter the other
party’s mailbox number after the
destination phone number.
Example: The other party’s phone
number is 123456 and their mailbox
number is 1.
Enter 1234561.
If you do not enter the other party’s
mailbox number, the message will be
sent to the public mailbox.
other party’s mailbox, enter the other
party’s mailbox number after the
destination phone number.
Example: The other party’s phone
number is 123456 and their mailbox
number is 1.
Enter 1234561.
If you do not enter the other party’s
mailbox number, the message will be
sent to the public mailbox.
7
To save the message, select “Yes”,
then press {>}.
then press {>}.
L
To send the message without saving it,
select “No”, then press {>}.
select “No”, then press {>}.
8
To send the message, select “Send”,
then press {>}.
then press {>}.
L
To cancel sending, press {ih}.
Note:
L
This unit supports SMS messages of up to
612 characters, however, the maximum
612 characters, however, the maximum
TG1810_1822AL(e-e).book Page 42 Tuesday, March 1, 2005 6:46 PM