Panasonic KX-TG1850NZ User Manual
Base Unit Settings
27
4
Select “Ringer Setup”, then press
,
,
.
5
Select “Night Mode”, then press
,
,
.
6
Select “Ring Delay”, then press
,
,
.
7
Select the desired setting, then press
,
,
.
8
Press {ih}.
Call options
Changing the recall time
Change the recall time, if necessary,
depending on the requirements of your
service provider or PBX.
depending on the requirements of your
service provider or PBX.
1
Press $ (middle soft key).
2
Select Z, then press ,.
3
Enter “0000” (default base unit PIN).
L
L
If you changed the PIN, enter it (page
28).
28).
4
Select “Call Options”, then press
,
,
.
5
Select “Recall”, then press ,.
6
Select the desired setting, then press
,
,
.
7
Press {ih}.
Setting pause length
Change the pause length, if necessary,
depending on the requirements of your
service provider or PBX.
depending on the requirements of your
service provider or PBX.
1
Press $ (middle soft key).
2
Select Z, then press ,.
3
Enter “0000” (default base unit PIN).
L
L
If you changed the PIN, enter it (page
28).
28).
4
Select “Call Options”, then press
,
,
.
5
Select “Pause Length”, then press
,
,
.
6
Select the desired setting, then press
,
,
.
7
Press {ih}.
Storing/changing emergency
numbers
numbers
These settings determine which phone
numbers can be dialled while the call bar
feature is on (page 23).
numbers can be dialled while the call bar
feature is on (page 23).
1
Press $ (middle soft key).
2
Select Z, then press ,.
3
Enter “0000” (default base unit PIN).
L
L
If you changed the PIN, enter it (page
28).
28).
4
Select “Call Options”, then press
,
,
.
5
Select “Emergency No.”, then press
,
,
.
6
Select a memory location, then press
,
,
.
L
If the memory location already
contains an emergency number, the
number is displayed.
contains an emergency number, the
number is displayed.
7
Enter/edit the number, then press ,.
L
To erase an emergency number, press
and hold {C/T}.
and hold {C/T}.
8
Press {ih}.
Note:
L
The default setting for emergency
numbers are stored in the first 3 memory
locations. It is recommended that you do
not overwrite these numbers.
numbers are stored in the first 3 memory
locations. It is recommended that you do
not overwrite these numbers.
Selecting area codes to be deleted
automatically
In some situations, phone numbers stored
automatically in the Caller ID list (page 31)
will include area codes. If you do not want to
dial the area codes when making calls from
the Caller ID list, you can store the area
automatically
In some situations, phone numbers stored
automatically in the Caller ID list (page 31)
will include area codes. If you do not want to
dial the area codes when making calls from
the Caller ID list, you can store the area
TG1850NZ(e).book Page 27 Monday, December 27, 2004 3:22 PM