Panasonic KX-TCD952EB User Manual
28
Direct Call
You can store a number in the direct call memory. This feature allows you to make a call easily by
pressing
pressing
. Incoming calls are accepted.
Setting the Direct Call Mode
After storing the direct call number, the unit will automatically switch to the direct call mode.
When the direct call mode is on, you can ONLY dial the number stored in the direct call memory.
When the direct call mode is on, you can ONLY dial the number stored in the direct call memory.
1
Press
.
2
Press
G
or
F
until “
F42
” is displayed.
3
Press
.
•
If the current stored number is the same
as the number you wish to set, skip to step
5.
as the number you wish to set, skip to step
5.
4
Enter the phone number, up to 24 digits.
•
If you misdial, press
. The digits are
erased from the right. To erase all digits,
press
press
firmly.
5
Press
.
•
A confirmation tone sounds.
•
The display will return to the stand-by
mode, then “
mode, then “
” is displayed.
PROG
C
C
OK
PROG
To change the direct call number:
Enter the new direct call number in step 4.
Enter the new direct call number in step 4.
To turn OFF the direct call
mode
mode
1
Press
.
2
Press
G
or
F
until “
F42
” is displayed.
3
Press
.
4
Press
.
•
“
” will go out.
PROG
OK
PROG
Dialling the Stored Number
Make sure that “
” is displayed, then press
.
•
The number stored in the direct call memory is dialled automatically.
•
When the handset is in “direct call” mode emergency calls can not be made until direct call is
cancelled.
F42-
- i-
KX-TCD952EB(026~033) 00.3.30 1:40 PM Page 28