Panasonic KX-TG2219B User Manual

The unit does not work.

“No link to base
Place on cradle and

try again.

” is displayed

and an alarm tone sounds.

Static, sound cuts in/out,
fades. Interference from
other electrical units.

The unit does not ring.

The handset display is blank.

You cannot program items,
such as the dialing mode.

•Check the settings (p. 11–15).

•Charge the battery fully (p. 12).

•Clean the charge contacts and charge

again (p. 13).

•Install the battery properly (p. 12).

•Place the handset on the base unit and

unplug the AC adaptor to reset. Plug in,
and try again.

•Re-install the battery and place the

handset on the base unit (p. 52). Try
again.

•You are too far from the base unit. Move

closer and try again.

•Place the handset on the base unit and

try again.

•Plug in the AC adaptor.

•Raise the base unit antenna.
•Locate the handset and the base unit

away from other electrical appliances
(p. 3).

•Move closer to the base unit.

•Raise the base unit antenna.

•Press 

Ü

to select a clearer channel in

the talk or speakerphone mode.

•The ringer volume is set to OFF. Set to

HIGH or LOW (p. 18).

•Charge the battery fully (p. 12).
•Programming is not possible while the

unit is in the talk or speakerphone mode,
when viewing the Caller List/directory list.

•Do not pause for over 60 seconds while

programming.

•Move closer to the base unit.

•

Ö

, 

Ñ

, 

Ü

or 

á

may have been

pressed when you picked up the
handset. Press 

(OFF)

and try again.