Panasonic KX-TCD961CXB User Manual
Speed Dialer
24
Storing Phone Numbers in Memory
You can store up to 20 phone numbers in the handset.
Make sure that the power is ON (p. 13) and the unit is in the stand-by mode.
Make sure that the power is ON (p. 13) and the unit is in the stand-by mode.
Dialing a Stored Number
1
Press
G or F until a desired memory
station number (
00
to
) is displayed.
•
You can enter the desired memory station
number after pressing
number after pressing
G or F.
2
Press .
3
Enter a phone number, up to 24 digits.
•
If you misdial, press
. Digits are
erased from the right. To erase all digits,
press firmly.
press firmly.
4
Press .
•
A confirmation tone sounds and the
display will return to the stand-by mode.
display will return to the stand-by mode.
•
To store other numbers, repeat steps 1
through 4.
through 4.
C
C
I
1
Press
G or F until the desired phone
number is displayed.
•
You can also enter the desired memory
station number (
station number (
00
to
) after pressing
G
or
F.
•
To exit the speed dialer memory, press
.
2
Press .
•
The number is automatically dialed.
C
I
To erase a stored number
1
Press
G or F until the desired phone
number is displayed.
•
You can also enter the desired memory
station number (
station number (
00
to
) after pressing
G or F.
2
Press .
3
Press .
4
Press .
C
I
•
If a pause is required for dialing, press
where needed. Pressing
counts as one digit (p. 26).
•
To cancel during programming, press
,
then start from step 1.
00-
00-3334444
Memory card
Use the memory card on page 65 as a name or
phone number index for speed dialer.
Cut out the card and attach it in a convenient
place.
phone number index for speed dialer.
Cut out the card and attach it in a convenient
place.
KX-TCD961CXB(22~27) 99.12.3 2:08 PM Page 24