Panasonic KX-TCD951EB User Manual
13
Chapter 1
Preparation
Selecting the Dialling Mode
You can program the dialling mode to tone or pulse. If you have touch tone service, set to tone. If
rotary or pulse service is used, set to pulse. The factory preset is tone.
Make sure that the power is ON and the unit is in the stand-by mode.
rotary or pulse service is used, set to pulse. The factory preset is tone.
Make sure that the power is ON and the unit is in the stand-by mode.
Ex. Tone is selected.
1
Press then .
2
Press .
3
Enter the base unit password.
•
The factory preset is 0000. To change the
base unit password, see page 23.
base unit password, see page 23.
3
I N T
PROG
5
To select Pulse, press
.
OR
To select Tone, press
To select Tone, press
.
6
Press .
•
A confirmation tone sounds and the
display will return to the stand-by mode.
display will return to the stand-by mode.
PROG
1
2
4
Press .
•
The current mode is displayed.
1: Tone
1: Tone
2: Pulse
1
•
If 5 beeps sound in step 3, the entered
password is incorrect. Enter the correct
password.
password is incorrect. Enter the correct
password.
•
To cancel during programming, press
,
then start from step 1.
PROG
3
o
- - - -
3 i
u
i
You can determine which type of local BT
exchange you are connected to using the
following procedure.
exchange you are connected to using the
following procedure.
1
Ensure that the dialling mode is selected
tone.
tone.
2
Press
, then identify the dial tone.
3
Dial a number you are familiar with.
4
If the call is successful, you are
connected to a tone exchange.
Therefore, leave the dialling mode as
tone.
connected to a tone exchange.
Therefore, leave the dialling mode as
tone.
5
If the call is not successful, you are
connected to pulse exchange.
Therefore, set the dialling mode to pulse.
connected to pulse exchange.
Therefore, set the dialling mode to pulse.
KX-TCD951EB(008~015) 99.6.16 5:37 PM Page 13