Panasonic KX-TCD951EB User Manual
Storing Phone Numbers in Memory
You can store up to 20 telephone numbers in the handset.
Make sure that the power is ON (p. 12) and the unit is in the stand-by mode.
Make sure that the power is ON (p. 12) and the unit is in the stand-by mode.
18
Dialling a Stored Number
1
Press
G or F until a desired memory
station number (
00
to
i9
) is displayed.
•
You can enter the desired memory station
number after pressing
number after pressing
G or F.
2
Press .
3
Enter a phone number, up to 24 digits.
•
If you misdial, press
. Digits are
erased from the right. To erase all digits,
press firmly.
press firmly.
4
Press .
•
A confirmation tone sounds and the
display will return to the stand-by mode.
display will return to the stand-by mode.
•
To store other numbers, repeat steps 1
through 4.
through 4.
PROG
C
C
PROG
1
Press
G or F until the desired phone
number is displayed.
•
You can enter the desired memory station
number (
number (
00
to
i9
) after pressing
G or F.
•
To exit the speed dialler memory, press
.
2
Press .
•
The number is automatically dialled.
C
Speed Dialling
To erase a stored number
1
Press
G or F until the desired phone
number is displayed.
•
You can enter the desired memory station
number (
number (
00
to
i9
) after pressing
G or F.
2
Press .
3
Press .
4
Press .
PROG
C
PROG
•
If a pause is required for dialling, press
where needed. Pressing
counts as one digit (p. 19).
•
To cancel during programming, press
,
then start from step 1.
•
If your line has rotary or pulse service, any
access numbers stored after pressing
access numbers stored after pressing
will
not be dialled.
PROG
RDL
RDL
00-
00-3334444
Memory card
Use the memory card on page 43 as a name or
phone number index for speed dialling. Cut out
the card and attach it in a convenient place.
phone number index for speed dialling. Cut out
the card and attach it in a convenient place.
KX-TCD951EB(016~021) 99.6.28 4:47 PM Page 18