Panasonic KX-TG2352PW User Manual

Recharge the battery when:
—“Recharge” is displayed on the handset,
—“

” flashes on the display, or

—the handset beeps intermittently while it is in use.

•If you DO NOT recharge the handset battery for more than 15 minutes, the

display will continually indicate “Recharge” and/or 

“

” 

will flash when the

handset is lifted off the base unit or the charger.

•If the battery has been discharged, the handset will display “Charge for 15h”

when you place the handset on the base unit or the charger. The handset will not
work. Keep charging until fully charged.

After your Panasonic battery is fully charged (p. 9):

Recharge

Needs to be recharged.

You can check the battery strength on the handset display.
The battery strength is as shown in the chart below.

Fully charged

Medium

Low

(flashing)

Up to 7 days

While in use (TALK)

Up to 4 hours

While not in use (Standby)

•The battery operating time may be shortened depending on usage conditions

and ambient temperature.

•Clean the charge contacts of the handset, the base unit and the charger

with a soft, dry cloth once a month. Clean more often if the unit is subject
to grease, dust or high humidity. Otherwise the battery may not charge
properly.

•If the battery is fully charged, you do not have to place the handset on the base

unit or the charger until “Recharge” is displayed and/or “

” flashes. This

will maximize the battery life.

•The battery cannot be overcharged.