Panasonic KX-TG2344 User Manual

This unit has several programmable functions which can be selected from the 
function menu on the display (p. 13).

• To go back to the previous menu, press Back, or press Select while 

“---(Go back)----” is displayed. If you press this key in the main menu, the 
unit will exit programming mode.

• After programming is complete, the display will return to the main menu or the 

sub-menu depending on which menu the selected item is located. (See the menu 
table on page 13.)

• You can exit programming mode at any time by pressing [OFF].
• If you do not press any buttons for 60 seconds, the handset will exit programming 

mode.

• If the unit detects a problem, an error message will be displayed (p. 64–65) and/or 

error beeps will sound.

Press [MENU].

• The main menu is displayed (p. 13).

Scroll to the desired item by pressing [d] or 
[

B].

Press Select to select the desired item.

If the item has a sub-menu, select the menu item (p. 13). Repeat 
steps 2 and 3 until the desired item is displayed. If the item has no 
sub-menu, go to step 5.

Select the desired setting by pressing [d] or 
[

B], then press Save to save your setting.

• A confirmation tone will be heard and the setting 

will be saved.

Press [OFF] to exit programming mode.

Back

Select

[MENU] enters the 
function menu.

When “d” or “

B” is displayed, 

navigator key scrolls through 
the menu.

[OFF] exits 
programming.

The soft keys selects the 
functions displayed above 
each soft key.

Initial setting

Back  

Select

K

d

B

L

Back

Back