Panasonic KX-TG2344 User Manual

If “No link to base. Move closer to base, try again.” is displayed 
even when using the handset near the base unit, the handset may have lost 
communication with the base unit. You need to re-register the handset to the base 
unit.
• Make sure the base unit is not being used.
• Have both handsets and base unit nearby during registration. 
• Follow steps 1 and 2 listed below. You have about 1 minute to complete 

communication by placing the handset on the base unit or charger. 
If you re-register the handset using the other handset’s extension number [ ] or 
[ ], the other handset will not function. 

• If the handset beeps 3 times and “Error!!” is displayed, an error occurred. Try 

again from step 1.

• You can stop registration by pressing [OFF] on the handset, and pressing 

LOCATOR/INTERCOM [ ] or [ ] on the base unit.

Base unit:
To re-register the handset 1, press and hold LOCATOR/INTERCOM [ ]
until a beep sounds.
To re-register the handset 2, press and hold LOCATOR/INTERCOM [ ] 
until a beep sounds.

• The CHARGE indicator flashes.

Handset:
Press and hold [FLASH/CALL WAIT] until 
“Handset Registering” is displayed.

• When registration is complete, a beep sounds 

from the handset and the display shows the 
number.

• Wait for 20 seconds after registration is 

Ex. Extension number 1

Handset
  Registering

Handset [1]
   Registered