Panasonic KX-TCD500AL User Manual

40

To exit the operation, press 

 at any time.

When this feature is set to ON, outgoing calls cannot be made. Intercom calls and calls 
to numbers assigned as emergency numbers can be made (see Setting the 
Emergency Calls on page 45).

• While the Call Bar mode is turned on, “

” is displayed.

After a direct call number has been set and the feature has been turned on, you can dial 
only the direct call number by pressing 

 or 

. When this feature is ON, 

emergency calls cannot be made. However, incoming calls can be answered.

• While the direct call mode is turned on, “

” is displayed.

Press JOYSTICK 
(or move).

Select “

 Setting 

Handset

”.

Select “Call 
Option

”.

Go to step 4.

Follow steps 1 to 3 shown above, then:

Select “Call Bar”.

Enter 4-digit Handset 
PIN.
(Factory Preset 
0000)

Select “On” or “Off”.

Follow steps 1 to 3 shown above, then:

Select “Direct Call 
No.

”.

Enter Direct Call 
Number.
(max. 24 digits)

Press JOYSTICK.
 

Select “Save”.

Select “On”.

500AL_e.book  Page 40  Monday, June 30, 2003  3:17 PM