Panasonic KX-TG2386 User Manual
Locator/Intercom
T
e
lephone System
For assistance, please call: 1-800-211-PANA(7262)
53
From
Using this feature, you can also locate a misplaced handset.
Answering Intercom Calls
When a handset is paged, it rings and the Ringer/Message Alert indicator flashes
rapidly.
rapidly.
When the base unit is being paged, it rings.
1
Press [LOCATOR/INTERCOM].
• The SP-PHONE indicator lights.
• The handset will ring for 5 minutes.
• To stop paging, press [SP-PHONE] or [LOCATOR/INTERCOM].
• The handset will ring for 5 minutes.
• To stop paging, press [SP-PHONE] or [LOCATOR/INTERCOM].
2
When the paged party answers, talk into the MIC.
3
To disconnect the intercom, press [SP-PHONE] or [LOCATOR/
INTERCOM].
INTERCOM].
• The indicator light goes out.
During an intercom call:
• If you have difficulty hearing while using the handset speakerphone and base
unit speaker, decrease the speaker volume by pressing VOLUME [<] on the
base unit or [d] on the handset.
base unit or [d] on the handset.
• If an incoming call is being received, you will hear two tones (incoming call
tone, page 59) and “
” will flash rapidly on the base unit.
To answer the call;
— if using the handset, press [OFF], then [C] or [s].
— if using the base unit, press [SP-PHONE] twice.
— if using the handset, press [OFF], then [C] or [s].
— if using the base unit, press [SP-PHONE] twice.
1
Press [C], [s] or [HOLD/INTERCOM].
• You can also answer a call by pressing any button
except [d], [B] or [OFF].
2
To disconnect the intercom, press [OFF].
1
Press [SP-PHONE] or [LOCATOR/INTERCOM].
2
To disconnect the intercom, press [SP-PHONE] or [LOCATOR/
INTERCOM].
INTERCOM].
• When the ringer volume is turned off (p. 17, 18), the handset and the base unit
will ring at the low level for intercom calls.
• You cannot change the ringer tone for intercom calls.
Base Unit
LINE
IN USE
Handset
Call from Base
Base Unit
PQQX14302ZB.book 53 ページ ２００４年７月３０日 金曜日 午後４時５２分