Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. KX-TG2386
  5. User Manual

Panasonic KX-TG2386 User Manual

Download
Page of 92
Special Features
60
Key Tone 
You can select whether or not the handset keys will sound tones (key tone, 
confirmation tone, error tone). The factory preset is ON. 
Re-registering the Handset 
If “No link to base. Move closer to base, try again.” is displayed 
even when using the handset near the base unit, the handset may have lost 
communication with the base unit. You need to re-register the handset to the base 
unit.
• Make sure the base unit is not being used.
• Have both the handset and base unit nearby during registration. 
• Follow steps 1 and 2 listed below. You have about 1 minute to complete 
them.
• If the handset beeps 3 times and “Error!!” is displayed, an error occurred. Try 
again from step 1.
• You can stop registration by pressing [OFF] on the handset, and pressing 
[LOCATOR/INTERCOM] on the base unit.
1
Press [MENU].
2
Scroll to “Initial setting” by pressing [
d
] 
or [
B
], then press the soft key (Select).
3
Scroll to “Key tone” by pressing [
d
] or [
B
], 
then press the soft key (Select).
4
Select “Off” or “On” by pressing [
d
] or [
B
].
5
Press the soft key (Save), then press [OFF].
1
Base unit:
Press and hold [LOCATOR/INTERCOM] until a beep sounds.
• The CHARGE indicator flashes.
2
Handset:
Press and hold [FLASH/CALL WAIT] until 
“
Handset
 
Registering
”
 is displayed.
• When registration is complete, a beep sounds 
from the handset.
• Wait for 20 seconds after registration is 
complete while the handset establishes 
communication with the base unit.
Handset
Initial setting
Back  
Select
K
dB
L
Key tone
Back  
Select
K
dB
L
Key tone
:On
Back  
  Save
K
dB
L
Handset & Base Unit
Handset
  Registering
Handset [1]
   Registered
PQQX14302ZB.book  60 ページ  ２００４年７月３０日　金曜日　午後４時５２分