Panasonic KX-TCD410E User Manual
28
Multi-unit User Operation
: Handset Registration to a Base Unit
Handset Registration
The handset supplied with the base unit is already registered. If an optional handset is
purchased, it must be registered. Additional KX-A142E handsets are available to
purchase separately. Up to 6 handsets can be registered to a single base unit. Using
additional handsets allows you to have an intercom call while simultaneously conducting
a call to an outside line.
Handset must be registered within 1 minute after pressing PAGE button. If over 1
minute, press
purchased, it must be registered. Additional KX-A142E handsets are available to
purchase separately. Up to 6 handsets can be registered to a single base unit. Using
additional handsets allows you to have an intercom call while simultaneously conducting
a call to an outside line.
Handset must be registered within 1 minute after pressing PAGE button. If over 1
minute, press
then start over again.
Charge the optional handset batteries for 7 hours before initial use.
•
To exit the operation, press
any time.
*1 The factory preset is 0000.
KX-A142E Handset: You can see the illustrations for answering system feature on
additional KX-A142E handset body, but KX-TCD410E does not have an answering
system feature. Therefore, the answering system does not work even if KX-A142E
handset has been registered to KX-TCD410E.
KX-A142E Handset: You can see the illustrations for answering system feature on
additional KX-A142E handset body, but KX-TCD410E does not have an answering
system feature. Therefore, the answering system does not work even if KX-A142E
handset has been registered to KX-TCD410E.
Search/Select desired
base unit number
available to register
the handset.
base unit number
available to register
the handset.
If all registered handsets start ringing (Paging),
press to stop paging then start over again.
press to stop paging then start over again.
When a handset is
registered successfully,
a confirmation tone
sounds and " "
icon lights.
registered successfully,
a confirmation tone
sounds and " "
icon lights.
Press and hold on the Base Unit
(for about 10 seconds) until the green indicator flashes.
(for about 10 seconds) until the green indicator flashes.
4-digit Base
Unit PIN after
Unit PIN after
"BS PIN"
is
displayed.
*1
Press OK.
4
7
8
5
6
Press
RIGHT.
RIGHT.
Press MENU.
Search/Select
"REGISTRATION"
"REGISTRATION"
.
Search/Select
"SETTING HS"
"SETTING HS"
.
1
2
3
"REGISTER HS"
410E.book Page 28 Wednesday, March 26, 2003 1:49 PM