Panasonic KX-TCD510AL User Manual
54
Multi-Unit User Operations
Base Unit Selection
When “Auto” (Automatic Base Unit Selection) is selected, the handset automatically
searches for other registered base units if you move outside of the radio range of the
current base unit.
When a specified base unit is selected, the handset will access that base unit only.
Calls (both incoming and outgoing) can be conducted only via the selected base unit,
even if the radio cells overlap with neighbouring base units.
searches for other registered base units if you move outside of the radio range of the
current base unit.
When a specified base unit is selected, the handset will access that base unit only.
Calls (both incoming and outgoing) can be conducted only via the selected base unit,
even if the radio cells overlap with neighbouring base units.
To exit the operation, press
at any time.
Intercom Between Handsets
You can use your handsets as a 2-way intercom.
Intercom calls can be conducted within the radio cell of the current base unit, but
not with units in neighbouring radio cells.
Intercom calls can be conducted within the radio cell of the current base unit, but
not with units in neighbouring radio cells.
To exit the operation, press
at any time.
For example, when Handset 1 calls Handset 2:
• You can also answer a call by pressing
,
to
,
,
or
instead of
pressing
(Any Key Talk).
Terminating a Call
1
Press JOYSTICK (or move).
2
Select “
Setting Handset
”.
3
Select “Select Base”.
4
Select “Auto” or desired base unit.
<Handset 1>
<Handset 2>
1
Press INTERCOM
, then press the
desired handset number
.
2
Press TALK
.
<Handset 1 or 2>
3
Press TALK OFF
.
510AL_e.book Page 54 Monday, June 30, 2003 6:28 PM