Panasonic KX-T2375ALW User Manual

Page of 36
30
Before Requesting Help
Problem
The unit does not work.
The unit does not ring.
You cannot dial.
The other party suddenly
cannot hear your voice
during a conversation.
You cannot program items
such as the dialling mode.
You cannot store a phone
number in memory.
While programming, the
unit starts to ring and stops
the program.
Remedy
Check the settings (p. 6–12).
Remove the batteries and reinstall
them to reset the unit.
KX-T2375ALW is not designed to be
used with rotary (pulse dialling)
service.
The RINGER selector is set to OFF.
Set to HIGH or LOW (p. 11).
Dial lock mode is set. To cancel the
mode, see page 25.
The dialled number is restricted. To
cancel, see page 27.
(MUTE)
may have been pressed during
the conversation. If “
” is displayed,
press 
(MUTE)
.
Programming is not possible when a
call is put on hold.
Do not pause for over 60 seconds
while programming.
Programming is not possible when a
call is put on hold.
Check that the batteries are installed in
the unit and that the battery power is
not low.
Do not enter a phone number more
than 22 digits long.
When using the Dial Lock (p. 25) or
Call Restriction feature (p. 26), you
cannot store a phone number in the
EMERGENCY button.
To answer the call, lift the handset or
press 
(SP-PHONE/HEADSET)
. Start
again from the beginning after hanging
up.
PQQX13367ZA-BM04  02.1.9 9:00 AM   y [ W  30