Panasonic KX-T2375ALW User Manual

Installation
Attached to this apparatus is an approval label. This label is evidence that it is a
“Permitted Attachment” which has been authorised to be connected to your
telephone service. 
Conditions relating to connection and operation of this Permitted Attachment are
contained in Telecommunications General By-Law 220 (5).

You are authorised to install this Permitted Attachment yourself by plugging it into
the line socket of any regular telephone. You may connect it in place of your
existing telephone or to any spare telephone socket installed in your premises.

To disconnect your existing telephone you must first remove its plug from the line
socket. You can then insert the plug of your Permitted Attachment into the socket
and use your equipment.

If the plug of your existing telephone cannot be readily removed, you will have to
remove the screw securing it. To do this proceed as follows:

1. Loosen screw “A” sufficiently to remove the socket cover. (See Fig. 1.)
2. Remove screw “B” and withdraw the plug. (See Fig. 2.)
3. Replace screw “B”. (See Fig. 3.) Ensure that it screws completely into the

socket recess. (If the screw is too long, increase the hole depth or replace the
screw with one 5 mm shorter.)

4. Replace socket cover and tighten screw “A”. (See Fig. 4.)

SOCKET

SCREW “A”

PLUG

Fig. 1

TELEPHONE CORD

Connect to the 
PLUG as shown 
in Fig. 1.

SCREW
“B”

Fig. 3

SOCKET

SCREW “A”

Fig. 4

SCREW
“B”

Fig. 2

PQQX13367ZA-BM04  02.1.9 9:00 AM  y [ W  

34