Panasonic KX-TCD540NZ User Manual
77
Teleph
one Syst
em
Multi-Unit User Operations
Cordless Handset Registration to a Base Unit
The cordless handset supplied with the base unit is already registered. If an optional
cordless handset is purchased, it must be registered as follows.
Charge the optional cordless handset batteries for 7 hours before initial use.
Cordless handset registration must be completed within 1 minute after pressing
cordless handset is purchased, it must be registered as follows.
Charge the optional cordless handset batteries for 7 hours before initial use.
Cordless handset registration must be completed within 1 minute after pressing
. If over 1 minute, press
then start over again.
To exit the operation, press
at any time.
•
If you enter an incorrect Base Unit PIN, an error tone will sound. Repeat from step 1.
•
To register a cordless handset to more than one base unit, repeat from step 1 with
the other base unit(s).
the other base unit(s).
•
The cordless handset main menu may change depending on the base unit that the
cordless handset is registered to.
cordless handset is registered to.
1
Press JOYSTICK
(or move).
(or move).
2
Select “
Setting
Handset
”.
3
Select
“
“
Registration
”.
4
Select “
Register
H/set
”.
5
Press and hold
on the Base Unit (for about
3 seconds) until the tone sounds.
6
Select the desired
base unit.
base unit.
7
Enter 4-digit Base Unit
PIN.
(Factory Preset 0000)
PIN.
(Factory Preset 0000)
8
Press JOYSTICK.
When a cordless handset is registered successfully, a confirmation tone sounds and the
icon is displayed.
&