Panasonic DBS 824 User Manual

Handsfree Answerback

Key Telephone Features

3-42

DBS 824-3.0/3.2-700

Revised April 2000

• If a new code is programmed into a key, the previously programmed code 

is erased.

• To erase a code programmed into a key, press the HOLD key when the 

display reads “Enter Code.” “Code Cleared” then appears on the display.

• The system can be programmed so that Pooled Trunk Access calls 

automatically use LCR when 9 is selected.

• Night Service, DND, and BGM can be activated through FF keys without 

lifting the handset.

• When you are making a call using the Speed Dialing feature, the FLASH 

key stored in Speed Dialing becomes the PBX flash feature.

(CPC-S and CPC-M)

Use the Handsfree Answerback feature to answer a call without lifting the 
handset. Your extension must be programmed for Voice Calling for you to 
use this feature. If your extension is not set for Voice Calling, the caller must 
press “1” during a call to switch from Tone Calling to Voice Calling.

1.  Confirm that the MUTE LED is off.

If it is lit, press the MUTE key to turn it off.

2.  Speak into the microphone.

• FF1 (System): Extension Intercom Calling

• Stay within three feet of the microphone.

• The MUTE feature can be selected from the Menu screen on large display 

phones. With other DBS 824 key phones, the MUTE function is assigned 
to a fixed key.