Panasonic DBS 824 User Manual

Call Waiting

DSLT Features

4-16

DBS 824-3.0/3.2-700

Revised April 2000

4. Dial 

“8.”

The third party need only pick up the handset to speak to the outside line.

5.  Replace the handset.

• FF1 (System): Onhook (Automatic) Transfer

• FF1 (System): Recall Timer for Extension -Transferred CO Calls

• FF1 (System): Recall Timer for Extension -Transferred CO Calls

• You cannot transfer a call to an extension that has Do Not Disturb or 

Absence Message activated.

• You can transfer a call to an extension that has Call Forwarding activated. 

The transferred call will follow the call forwarding path of the extension it 
is transferred to. 

For example, if phone “A” is covered to phone “B,” calls that are 
transferred to phone “A” will be forwarded to phone “B.”

• When you transfer a call to an extension that does not answer and does not 

have Call Forwarding activated, the transfer recalls to your extension after 
the Transfer Recall Timer expires. 

(CPC-S and CPC-M)

You can send a Call Waiting signal, followed by a brief LCD message, to a 
busy extension. The party receiving the message need only replace the 
handset and then pick it up again to be automatically connected to your 
extension.

The following messages can be sent using the Call Waiting feature: