Panasonic DBS 824 User Manual

SLT Features

Call Transfer

Revised April 2000

DBS 824-3.0/3.2-700

  5-15

• FF1 (System):Extension Transfer Recall Timer for Intercom Calls

• In order for users to transfer calls by flashing the switchhook, dialing the 

extension, and going onhook, the Onhook Transfer feature must be 
enabled.

• You cannot transfer a call to an extension that has Do Not Disturb or 

Absence Message activated.

• You can transfer a call to an extension that has Call Forwarding activated. 

The transferred call will follow the call forwarding path of the extension it 
is transferred to. 

For example, if extension “A” is covered to extension “B,” calls that are 
transferred to extension “A” will be forwarded to extension “B.”

• When you transfer a call to an extension that is busy or does not answer 

and does not have Call Forwarding activated, the transfer will recall your 
extension after the Transfer Recall Timer expires. 

Using the Screened Transfer feature, you can contact a third party via an 
extension before transferring a call to that party.

1.  Flash the switchhook to place the call on hold.

The phone issues intercom dial tone.

2.  Dial the extension number to which the call is to be transferred.

3.  When your call is answered, inform the third party of the transfer.

4.  Replace the handset. 

The third party need only pick up the handset to speak to the outside line.