Panasonic DBS 824 User Manual

Centrex/PBX Compatibility

System Features

1-14

DBS 824-3.0/3.2-700

Revised April 2000

Users can assign an FF key to flash when there are new entries in the log. 
When the user presses the key to access the log, the LED turns off.

Call Logs can be assigned to both attendant and non-attendant extensions. 

(CPC-S and CPC-M)

Centrex/PBX Compatibility allows the DBS 824 to be connected to centrex 
or PBX lines. 

The DBS 824 supports up to 8 access codes for dialing centrex or a PBX. 
These access codes allow the DBS 824 SMDR output to exclude the number 
dialed to reach a centrex or PBX line. 

The DBS 824 also supports transmission of a flash signal over the centrex or 
PBX link.

• FF1 (System): PBX Access Code(s)

• FF2 (Trunks): Trunk Type

• FF8 (Least Cost Routing): LCR Add Tables

• The LCR Add Table can be used to prefix digits for outgoing calls through 

Centrex. 

(CPC-S and CPC-M)

Direct Inward System Access (DISA) gives off-site users dial-in access to the 
DBS 824. Users access DISA by dialing in on the DISA trunk.