Panasonic KX-TCD580NZ User Manual
Answering System Features (KX-TCD580 only)
35
Answering system
The KX-TCD580 base unit contains an
answering system which can answer and
record calls for you when you are
unavailable to answer the phone. You can
also record your own voice memos (page
36) and phone conversations (page 14).
For details about memory capacity, see
page 37.
Important:
answering system which can answer and
record calls for you when you are
unavailable to answer the phone. You can
also record your own voice memos (page
36) and phone conversations (page 14).
For details about memory capacity, see
page 37.
Important:
L
Only 1 handset can access the answering
system (listen to messages, record a
greeting message, etc.) at a time.
system (listen to messages, record a
greeting message, etc.) at a time.
L
When callers leave messages, the unit
records the day and time of each
message. Make sure the date and time
have been set (page 11).
records the day and time of each
message. Make sure the date and time
have been set (page 11).
Turning the answering
system on/off
system on/off
1
Press $ (centre of joystick).
2
Select K, then press ,.
3
Select “Answer On” or “Answer Off”,
then press ,.
then press ,.
4
Press {ih}.
Note:
L
When the answering system is turned on,
r
r
is displayed next to the battery icon.
L
When the answering system is turned off,
r
r
disappears. The unit will not answer
calls.
Greeting message
When the unit answers a call, callers are
greeted by a greeting message. You can
record your own greeting message or use a
prerecorded greeting message.
greeted by a greeting message. You can
record your own greeting message or use a
prerecorded greeting message.
Recording a greeting message
You can record your own greeting message
(2 minutes and 30 seconds max.).
(2 minutes and 30 seconds max.).
1
Press $ (centre of joystick).
2
Select K, then press ,.
3
Select “Record”, then press ,.
4
Select “Record OGM”, then press
,
,
.
L
Hold the handset about 20 cm away
and speak clearly into the microphone.
and speak clearly into the microphone.
5
Press Z to stop recording.
L
The greeting message is played back.
6
Press {ih}.
Note:
L
To erase the greeting message, press
_
_
during playback, select “Yes”, then
press ,.
L
“Error” is displayed if the greeting
message is less than 1 second long.
message is less than 1 second long.
Using a prerecorded greeting
message
message
If you erase or do not record your own
greeting message, the unit can play a
prerecorded greeting message for callers
and ask them to leave messages. If the
message recording time (page 40) is set to
“Greeting Only”, caller messages will
not be recorded and the unit will play a
different prerecorded greeting message
asking callers to call again.
greeting message, the unit can play a
prerecorded greeting message for callers
and ask them to leave messages. If the
message recording time (page 40) is set to
“Greeting Only”, caller messages will
not be recorded and the unit will play a
different prerecorded greeting message
asking callers to call again.
Playing back the greeting
message
1
message
1
Press $ (centre of joystick).
2
Select K, then press ,.
3
Select “Play OGM”, then press ,.
4
Press {ih}.
KX-TCD560-580NZ(e).book Page 35 Tuesday, July 6, 2004 10:49 AM