Panasonic 524X07801B User Manual
166
DBS 576 (USA), Revised 6/11/98
576-13-700
Chapter 5. Key Telephone Features
Section 700 - Operation
Operation
Related Programming
•
FF1-0-02: ARS for MCO Access Code 1/Route Advance for MCO Access Code
•
FF1-3: MCO Group
•
FF5-2: MCO Outgoing Trunk Assignments
•
FF5-3: MCO Incoming Trunk Assignments
•
FF4: FF Key Assignments
Considerations
•
Press the MCO key that flashes red to answer an outside call.
•
If you are already on a call appearing on an MCO key and you press another MCO key, a line on
the other MCO key is selected and the first call is dropped.
the other MCO key is selected and the first call is dropped.
•
If a CO key is assigned, the CO Key LED will light when that specific trunk is used instead of
the MCO key LED.
the MCO key LED.
•
There are five groups of outside lines: 9 and 81-84 (default).
•
MCO keys cannot be assigned on the DSS/72 or the EM/24.
•
An MCO key must be assigned in programming mode. The MCO key cannot be assigned by the
end user with FF key assignments.
end user with FF key assignments.
Message Key
CPC-96, CPC-288, and CPC-576 All Versions
Description
The System supports the MSG key on the VB-44225 large-display phone. This key provides the
following functionality:
following functionality:
Operation
Action
To originate a trunk call
Press an idle MCO key.
The key blinks (green) as the call is made.
To receive a call on an MCO key.
If ringing line preference is enabled, go off-hook.
If ringing line preference is not enabled, go off-
hook and press the MCO key with the green
flashing LED.
If ringing line preference is not enabled, go off-
hook and press the MCO key with the green
flashing LED.
The LED lights solid green.
To place a call on Exclusive Trunk Hold
Press the MCO key.
The key flashes green while the call is held.
To place a call on System Trunk Hold
Press the
HOLD
key.
The key flashes green while the call is held.
To transfer a call
Press
HOLD
, dial the destination extension, then
press
PROG
(if on-hook transfer is off) or go on-
hook.