Panasonic 524X07801B User Manual

Section 700 - Operation

Chapter 5. Key Telephone Features

576-13-700

DBS 576 (USA), Revised 6/11/98

193

To seize an idle trunk:

Hardware Requirements

•

N/A

Related Programming

•

FF1-3: MCO Access

•

FF1-2: Dial Plan

•

FF5-2: MCO Trunk Group (Outbound)

•

FF7: ARS/TRS

Considerations

•

The System supports up to 576 outside lines in a six-cabinet configuration. These lines can be
divided into 99 different trunk groups.

•

Each trunk group can support up to 50 outside lines.

•

Each MCO Tenant Group can have up to 5 MCO trunk access codes. System defaults for MCO
trunk access codes are displayed in the following table.

•

MCO1 can have up to 5 trunk groups assigned by the Advanced Trunk Group feature.

•

MCO1 access code is used for Automatic Route Selection (ARS) access code.

Table 14. MCO Trunk Access Codes

Action

Result

1. Lift the handset or press the ON/OFF key.

Intercom dial tone

2. Enter the trunk access number (9 or 81-84). (See Table 14.)

• Outside dial tone

•

CO XXX

displays (where XXX = trunk

number)

3. Dial the phone number.

Dialed phone number displays

MCO Group

Trunk Access Code

MCO1

MCO2

MCO3

MCO4

MCO5