Panasonic 524X07801B User Manual

Page of 334
Section 700 - Operation
Chapter 6. DSLT Features
576-13-700
DBS 576 (USA), Revised 6/11/98
 243
Operation
To set the Timed Reminder Call feature:
To cancel the Timed Reminder Call feature:
Hardware Requirements
N/A
Related Programming
N/A
Considerations
An alarm tone (default = 60 seconds) will be issued at the specified time.
An extension can have only one Reminder Call set at a time.
To change the Reminder Call, simply enter a new time.
If the extension is in use when the reminder call is scheduled, the reminder call is issued 3 
minutes later.
Trunk Access
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
The System supports the following ways to seize an idle trunk to make an outside call:
Direct Trunk Access
MCO Trunk Access
Action
Result
1.   Lift the handset or press the ON/OFF key.
Intercom dial tone
2.   Enter the Timed Reminder Set code (default = *31).
3.   Enter the time you want the Timed Reminder Call to sound. 
(Enter the time in 24-hour format. For example, 0100 for 1 
AM, 1300 for 1 PM.)
4.   Replace the handset or press the ON/OFF key.
Action
Result
1.   Lift the handset or press the ON/OFF key.
Intercom dial tone
2.   Enter the Timed Reminder Cancel code (default = *39).
3.   Replace the handset or press the ON/OFF key.