Panasonic 524X07801B User Manual
Section 700 - Operation
Chapter 4. User Maintenance
576-13-700
DBS 576 (USA), Revised 6/11/98
91
Hardware Requirements
•
N/A
Related Programming
•
N/A
Considerations
•
N/A
Set Mode Schedule
Description
(For a description of Automatic Day/Night System Mode, see “Automatic Day/Night Mode” on page
39.)
39.)
You can set the System to automatically enter None, Day 1, Day2, Night, Night (1), or Night (2)
modes based upon mode patterns. You can define up to 3 patterns with up to 5 modes for each day.
(This menu allows the setting of the patterns.)
modes based upon mode patterns. You can define up to 3 patterns with up to 5 modes for each day.
(This menu allows the setting of the patterns.)
Operation
To set the Mode Schedule:
Action
Result
1. If not already in User Maintenance mode, enter User Main-
81-
User MAINT
displays
2. At the 81 level, enter 07.
3. Press the HOLD key.
8107-
System Mode
displays
4. Press the HOLD key.
0-
Mode Schedule
displays
5. Press the HOLD key.
000
:HHMM
PTN 1-1 Start T
displays
6. Enter the start time in hours (two characters) and minutes
(two characters) for the Pattern 1 - first mode.
Note: To clear an entry or existing data, press the FLASH
key.
key.
7. Press the HOLD key.
001
:
PTN 1-1 Mode
displays
8. Enter the desired mode for Pattern 1 - first (0 - None, 1 -
Day 1, 2 - Day 2, 3 - Night, 4 - Night (1), 5 - Night (2)).
Note: To clear an entry or existing data, press the FLASH
key.
key.