NEC 1093099 User Manual

◆ Features

While on a handset call, Reverse Voice Over lets a busy keyset user make a private Intercom call to an idle 
co-worker. The busy user just presses and holds down a programmed Reverse Voice Over key to make a pri-
vate call to the assigned co-worker. The initial caller cannot hear the Reverse Voice Over conversation. The 
private Intercom call continues until the Reverse Voice Over caller releases the key again. The initial handset 
call can be an outside call or an Intercom call. An extension can have Reverse Voice Over keys for more than 
one co-worker.

Reverse Voice Over could help a salesperson, for example, when placing a call to an important client. The 
salesperson can talk with the client and give special instructions to an assistant — without interrupting the 
initial call.

When the keyset is idle, the Reverse Voice Over key functions the same as a Hotline key. The key also shows 
at a glance the status of the associated extension:

Reverse Voice Over uses a system Conference circuit while it is active. The following table shows the sys-
tem’s Conference capacities:

The system’s 32 Conference circuits are dynamically allocated as users request them.

Off

Idle or not installed

On

Busy or ringing

Medium Flash

Assigned extension is in DND for outside 

calls (option 1)

Fast Flash

Assigned extension is in DND for Intercom 

calls (option 2) or All Calls (option 3)

Conference circuits

32

Maximum simultaneous users in Conference

(total of all Conferences system-wide)

32

Maximum simultaneous conferences

8

Maximum parties in any one Conference

(lines and/or extensions)

8