Nortel Networks 2212 User Manual
26
Chapter 2 WLAN Handsets overview
NN40050-101
NN40050-101
7
Press the Select button (or OK) to select the highlighted setting.
8
Do one of the following:
•
Press UP to return to the previous menu and configure another option.
•
Press
to exit all menus and return to the standby state.
You can also press Exit from the top-level menu to exit the menu and return to the active
(off-hook) state.
(off-hook) state.
Configure push-to-talk
Push-to-talk is available on the WLAN Handset 2211 only.
Push-to-talk mode enables two-way radio communication with another WLAN Handset 2211
user. You can enable/disable Push-to-Talk mode and select a channel.
user. You can enable/disable Push-to-Talk mode and select a channel.
To configure Push-to-Talk for the handset
1
Press
when the handset is in the standby state.
2
Press the Up and Down buttons to scroll through the menu and highlight
Push-to-Talk
.
3
Press the Select button (or OK) to select
Push-to-Talk
.
4
Press the Up and Down buttons to scroll through the menu and highlight
Enable/Disable
.
5
Press the Select button (or OK) to select
Enable/Disable
.
6
Press the Up and Down buttons to scroll through the menu and highlight one of the following
settings:
settings:
•
PTT Enable
— Enables Push-to-Talk mode.
•
PTT Disable
— Disables Push-to-Talk mode. This is the default.
7
Press the Select button (or OK) to select the highlighted option.
8
Press the Up soft key to return to the previous menu.
9
Press the Up and Down buttons to scroll through the menu and highlight
Channel
.
10 Use the Up and Down buttons to scroll through the menu and highlight a channel (1 to 8).
11 Press the Select button (or OK) to select the channel.
12 Do one of the following:
•
Press UP to return to the previous menu and configure another option.
•
Press
to exit all menus and return to the standby state.
You can also press Exit from the top-level menu to exit the menu and return to the active
(off-hook) state.
(off-hook) state.