Nortel Networks 1000E User Manual
Connecting MG 1000T system components
Page 159 of 488
Communication Server 1000E
Installation and Configuration
8
MG 1000T Expansion 3 and 4 network cables (NTDU0609) must be
routed from the 100 BaseT daughterboard through the cable slot on the
side of the MG 1000T Core with one ferrite on the inside of the Media
Gateway and the second ferrite external to the Media Gateway as shown
in Figure 39 on
routed from the 100 BaseT daughterboard through the cable slot on the
side of the MG 1000T Core with one ferrite on the inside of the Media
Gateway and the second ferrite external to the Media Gateway as shown
in Figure 39 on
. Connect to MG 1000T Expansion 3 and 4 using
the 100BaseT RJ-45 connector 1 on the back of each Media Gateway.
Note 3: The NTDU0609 crossover cables are connected directly to the
MG 1000T Core 100BaseT Daughterboards for MG 1000T Expansion 3
and 4.
MG 1000T Core 100BaseT Daughterboards for MG 1000T Expansion 3
and 4.
Note 4: The required NTDU0609 crossover cables are contained in the
NTDU19BA Cable Kit.
NTDU19BA Cable Kit.
Figure 39
MG 1000T SLAN subnet cables
MG 1000T SLAN subnet cables
9
Connect the MG 1000T Core ports, shown in Figure 40 on
to
the data network switch using a CAT5 patch cable.
Note: A customer supplied standard CAT5 cable is required.
100BaseT cable to
MG 1000T #2
MG 1000T #3
MG 1000T #4
MG 1000T #3
MG 1000T #4
MG 1000T #1
Cable slot for NTDU0609 cables
to MG 1000T Expansion 3 and 4
to MG 1000T Expansion 3 and 4