Nortel Networks 1000E User Manual

 Installing and configuring IP Phones

Communication Server 1000E

Installation and Configuration

Exit from LD 117. Enter the command:

NEW ZONE xxx p1 p2 p3 p4 p5

Create a new zone, where:

xxx = zone number = (0) - 255.

p1 = Intrazone available bandwidth 
= 0 - (10000) - 100000 (Kbps)

p2 = Intrazone preferred strategy 
= (BQ for Best Quality) or BB for Best Bandwidth

p3 = Interzone available bandwidth
= 0 - (10000) - 100000 (Kbps)

p4 = Interzone preferred strategy 
= BQ for Best Quality or BB for Best Bandwidth

p5 = Zone resource type
= (shared) or private

NEW ZONE xxx

Create a new zone with default values for the parameters:

p1 = 10000 (Kbps)
p2 = BQ
p3 = 10000 (Kbps)
p4 = BQ
p5 = shared

CHG ZONE xxx p1 p2 p3 p4 p5

Change parameters of a zone. All parameters must be 
re-entered, even those that are unchanged.

OUT ZONE xxx

Remove a zone.

DIS ZONE xxx

Disable a zone. When a zone is disabled, no new calls are 
established inside, from, or toward this zone.

ENL ZONE xxx

Enable a zone.

PRT ZONE xxx

Print zone and bandwidth information.