Nortel Networks 1000E User Manual

 Installing and configuring IP Phones

Communication Server 1000E

Installation and Configuration

14 Enter the node number and the temporary or administrator IP Phone 

Installer Password.

Note 1: An asterisk is displayed for each password digit entered; the 
actual password is not displayed.

Note 2: If this screen times out, or if you do not successfully enter the 
password in three attempts, the IP Phone continues its registration 
process as if no entry had been made to this prompt. You can reboot the 
telephone and try again if more tries are needed.

The IP Phone prompts:

TN: x.x

15 Enter the IP Phone’s (virtual) TN.

The IP Phone displays the logo, the date and time, and the DN keys.

16 Check for dial tone and the correct DN above the display.

Set-Based Installation enables the delegation of telephone installation to 
trusted users. To have a trusted user perform this function, configure a 
temporary IP Phone Installer Password for the system. See “Setting 
administrator and temporary IP Telephone Installer passwords” on 

. 

Note: This feature can be an alternative to LD 11 or OTM to configure 
IP Phones on the Call Server.

Follow Procedure 110 to use Set-Based Installation.

This procedure is the same as Procedure 107 on 

, and Procedure 109 on 

, except when the system 

response, displayed on the IP Phone, is as follows:

If you did not configure an IP Phone Installer Password, the IP Phone prompts: