Nortel Networks 1000E User Manual
Page 74 of 488
Rack-mounting the components
553-3041-210 Standard 4.00 September 2007
Media Gateway. The Media Gateway Expander would be approximately
1/4 in from the Media Gateway.
1/4 in from the Media Gateway.
Note: In the 5u pattern, a “u” is equal to 1.75 in. and includes three holes
spaced at 5/8 in. + 5/8 in. + 1/2 in.
spaced at 5/8 in. + 5/8 in. + 1/2 in.
Other data communications equipment can be installed in a rack with
CS 1000E system components.
CS 1000E system components.
This chapter contains the following procedures:
•
•
•
•
•
Lifting system components
Exercise care when lifting system components. If necessary, get assistance to
lift a component or install components in a rack. Table 11 on page 75 lists the
CS 1000E system components provided by Nortel and the weight of each
lift a component or install components in a rack. Table 11 on page 75 lists the
CS 1000E system components provided by Nortel and the weight of each
IMPORTANT!
Ensure that the unit’s power cord is appropriate for the area’s electrical
service. Do not modify or use the supplied AC power cord if it is not the
correct type.
service. Do not modify or use the supplied AC power cord if it is not the
correct type.