Netcomm V90s Leaflet

Page of 2
NETCOMM LIMITED 
ABN 85 002 490 486
  PO Box 1200, Lane Cove NSW 2066 Australia
P: 02 9424 2070  F: 02 9424 2010  E: sales@netcomm.com.au  W: www.netcomm.com.au
DYNALINK NZ  224b Bush Road, Albany, Auckland, New Zealand 
P: 09 448 5548  F: 09 448 5549  E: sales@dynalink.co.nz  W: www.dynalink.co.nz
Trademarks and registered trademarks are the property of NetComm Limited or their respective owners. Specifications are subject to change without notice. Images shown may vary slightly from the actual product.
www.dynalink.co.nz
www.dynalink.co.nz
V90s Desktop IP Phone
IP Telephone with Power over Ethernet (PoE) Support
TECHNICAL SPECIFICATIONS
Your NetComm dealer:
Standards Supported
  SIP V2.0 Standard (RFC 3261)
  SDP (RFC 2327)
  Digest authentication and MD5 encryption (SIP)
  ITU-T G.711 Alaw/Ulaw, G.729A, G.729AB, 
G.723.1
  RTP (Real Time Transmission Protocol) RFC1889
  RTCP (Real Time Transport Control Protocol)  
RFC 3550
  Proprietary Firewall-Pass-Through Technology
  Simple Traversal of UDP over NAT (STUN)
  Web-based Management
  PPP over Ethernet (PPPoE)
  PPP Authentication Protocol (PAP)
  Internet Control Message Protocol (ICMP)
  TFTP Client
  Hyper Text Transfer Protocol (HTTP)
  Dynamic Host Configuration Protocol (DHCP)
  Domain Name System (DNS)
  Out-band DTMF Relay: RFC 2833 and SIP Info
  SIP proxy address in DHCP (RFC 3361)
Software Features
  Built-in HTTP, Phone Menu for accessing internal 
parameters
  PPPoE Client
  NAT Broadband Router functions
  DHCP Client
  DHCP Server
  Firmware On-line upgrade
  Phone Book
  Memory Dial
  Speed Dial
  Caller ID
  Multiple Language Support
Hardware Interface
  Ethernet PC & Network Port (2 x RJ-45, 
10/100BaseT)
  DC Jack
• 
Headset Port
Centralised configuration and management
The V90 terminal can download a configuration file from an HTTP server that will prompt it to upgrade its firmware 
file. A DHCP server is used to assign an IP address to the V90 phone and inform the V90 of the HTTP address 
of the configuration file.   
Programmable Function Keys
The V90 features 5 user programmable keys that can be used for speed dialling or any number of common 
everyday tasks.
Quality of Service 
The built in QoS of the V90 guarantees that call quality is maintained and monitored to give you crisp clear 
calls with no drop out or stuttering.
Key Features
  SIP 2.0 standardization deployed throughout
  Advanced audio processing – jitter buffer with packet delay and packet loss concealment
  Voice packetization & flexible voice compression
  Programmable voice packet payload size
  Centralised control of  codec negotiation
  In-band and Out-band DTMF transport
  G.168 Echo Cancellation
  Two Ethernet ports supporting router and bridge mode
  Call Redial, Flash, Mute
  Caller ID / Call Waiting
  Call Hold/Forward/Conference/Transfer (attended/unattended call transfer)
  Phone Book Memory Dialing
  Speed Memory Dialing
  Hands Free Dialing
  Hotline Dialing
  Call history for incoming, outgoing and missed calls 
  Programmable Generic Function Key Definitions (automatic adding prefixes/customized LCD menu)
  Soft Login/Logout key for SIP registration
  128x64 dot matrix LCD with back light
  Full Duplex Speakerphone
  Auto Provisioning Support
  Firmware upgrading, loading configuration, phone status reports via Centralized Management tool
  Local Music on Hold