Clarity C35 User Manual

17

1.  Check all phone cords and connections. Make sure they are  

 

 

plugged in securely.

2.    Plug unit into a different phone jack to help determine if the 
 

diffi culty is with the phone or the phone jack.

3.  Switch out handset or telephone line cords.

4.  Disconnect any other equipment that may be attached to 
 the 

phone.

1.  Make sure TONE/PULSE switch is set correctly.

2.  Phone may be at the end of a long line of phones (loop). Phone 
 

may not be getting enough power from the phone line. It may be  

 

necessary to wait for a few seconds after lifting the handset to  

 

 begin 

dialing.

3.  The C35 is not compatible with Digital PBX Systems. If a 
 

standard, single line phone works on the system, your C35  

 

 should 

also.

1.  Too many phones or phone devices on the line may effect your  

 

 

phone’s transmission. As a guideline, more than fi ve (5) phones  

 

 

or phone devices may overload the phone line. Disconnect one  

 

 

(1) or two (2) devices to see if that eliminates the problem. If not,    

 

contact your local phone company for load guidelines.

2.  You may not be speaking directly into the transmitter. Always speak  
 

directly into the mouth piece in your normal tone of voice.