DKS Enterprises 1803 User Manual
51
Surface Trim Ring
Use to recess surface mount 1803 or 1810 units into a wall or column.
P/N 1803-150.
P/N 1803-150.
Flush Kit
Use to install flush style 1803 or 1810 units into a wall or column. Kit
includes rough in back box and trim ring. P/N 1814-165 comes with
stainless steel trim ring. P/N 1814-166 comes with gold plated trim ring.
includes rough in back box and trim ring. P/N 1814-165 comes with
stainless steel trim ring. P/N 1814-166 comes with gold plated trim ring.
Flush Ring
Use to surface mount a flush style 1803 or 1810 unit. P/N 1814-152.
Stainless Steel Case
Replaces the black steel surface mount case on the 1803 and 1810 units
with a stainless steel case. P/N 1810-102.
with a stainless steel case. P/N 1810-102.
Surge Suppressers
High voltage (120 V) suppresser: P/N 1878-076.
Phone line suppresser: P/N 1878-077.
Low voltage (28 V) suppresser: P/N 1878-078.
Phone line suppresser: P/N 1878-077.
Low voltage (28 V) suppresser: P/N 1878-078.
Mounting Post
Standard gooseneck mounting post: P/N 1200-045.
Standard gooseneck mounting post – long: P/N 1200-046
Heavy-duty gooseneck mounting post: P/N 1200-047.
Heavy-duty gooseneck mounting post – Long: P/N 1200-048.
Standard gooseneck mounting post – long: P/N 1200-046
Heavy-duty gooseneck mounting post: P/N 1200-047.
Heavy-duty gooseneck mounting post – Long: P/N 1200-048.
Telephone Test Set
Includes clips, cord and carrying case. P/N 1800-050.
Battery
12 volt .8 amp hour gel cell provides stand by power during power
interruptions. P/N 1801-008.
interruptions. P/N 1801-008.
SYMPTON POSSIBLE
SOLUTION(S)
Four-digit entry codes
will not work.
will not work.
•
Forgetting to press # first.
•
Entry code is time zone restricted. Reprogram time zone or turn time zone off
(5.2.4).
(5.2.4).
•
Entry code attempted was a flash code that is no longer valid.
Five-digit entry codes
will not work.
will not work.
•
Forgetting to press ## first.
•
Entry code is time zone restricted. Reprogram time zone or turn time zone off
(5.2.4).
(5.2.4).
Entry codes will not
activate relay 1.
activate relay 1.
•
Programmed entry codes are greater than the divide number. Reprogram
divide number or program entry codes less than the divide number.
divide number or program entry codes less than the divide number.
Entry codes will not
activate relay 2.
activate relay 2.
•
Programmed entry codes are less than or equal to the divide number.
Reprogram divide number or program entry codes greater than the divide
number
Reprogram divide number or program entry codes greater than the divide
number
System emits a beep
every 30 seconds.
every 30 seconds.
•
Master code switch is in the ON position.
LCD is unreadable
(1802, 1803, 1810
units only).
(1802, 1803, 1810
units only).
•
Adjust contrast.
6.2 ACCESSORIES