DKS Enterprises 1810 User Manual

 

31 

This programming sequence sets the function of the 0 through 9, and the # keys on the keypad 
during conversation. The keys can be set to hang-up the entry system when they are pressed during 
conversation, or they can be programmed to DTMF tone out during conversation. The later may be 
desirable if the entry system is used with an auto-attendant type telephone system where the caller is 
prompted to enter numbers from a touch-tone telephone. HINT: If DTMF tones are required, program 
the # or * key to hang-up the system. 

 

1. Press 

 and enter the four-digit MASTER CODE 

BBBB

 (beep). 

2. 

Enter the desired key number 

B

 then press 

 (beep). 

3. Press 

 (beep) for hang-up, or press 

 (beep) for touch-tone. 

4. 

Repeat steps 3 and 4 to program other keys. 

5. Press 

 TOGETHER to end this programming step (beeeeeep). 

 

This programming sequence sets the function of the 

 key on the keypad during conversation. This 

key can be set to hang-up the entry system when pressed during conversation, or it can be 
programmed to touch-tone out during conversation. 

 

1. Press 

 and enter the four-digit MASTER CODE 

BBBB

 (beep). 

2. Press 

 (beep) for hang-up, or press 

 (beep) for touch-tone. 

3. Press 

 TOGETHER to end this programming step (beeeeeep).