Grandstream Networks 200 User Manual

 

28

Update

       

 

All Rights Reserved Grandstream Networks, Inc. 2004, 2005

 

 
 

This contains the password to access the Web Configuration Menu. 
This field is case sensitive with a maximum length of 25 characters. 

There are two modes under which the BudgeTone 200 can operate: 

•  If DHCP mode is enabled, then all the field values for the Static 

IP mode are not used (even though they are still saved in the 
Flash memory.) The BudgeTone 200 will acquire its IP address 
from the first DHCP server it discovers from the LAN it is 
connected. 

•  To use the PPPoE feature the PPPoE account settings need to 

be set. The BudgeTone 200 will attempt to establish a PPPoE 
session if any of the PPPoE fields is set. 

•  If Static IP mode is enabled, then the IP address, Subnet Mask, 

Default Router IP address, DNS Server 1 (primary), DNS 
Server 2 (secondary) fields will need to be configured. These 
fields are set to zero by default. 

This parameter controls how the date/time is displayed according to the 
specified time zone. 

This parameter controls whether the time will be displayed in daylight 
savings time or not. If set to “Yes”, then the displayed time will be 1 
hour ahead of normal time.  

Allow user to choose among the following three formats: 
Year-Month-Day 
Month-Day-Year 
Day-Month-Year 

This parameter controls whether the device is working in NAT router 
mode or Bridge mode. Need save the setting and reboot the device 
before the setting start to work. 

If set to “Yes”, user can access the configuration page through the 
WAN port, instead of connecting PC and BT200 through the “PC” port 
to do the configuration. On the other hand, it exposes the BT200 to 
others, and may cause some security issues for users. Default is No.  

Reply to ICMP on WAN port  If set to “Yes”, The BT200 will respond to the PING command from 

other computers for testing, but it also is vulnerable to the DOS attack. 
Default is No.