Samsung 7000 Series User Manual
13
2. Dial the station number OR use the
[205] PASSCODE
UP and DOWN keys to scroll through
PASSCODE:
,,,,
the keyset numbers and press the
right soft key to move the cursor right
right soft key to move the cursor right
3. Press HOLD to reset the passcode
[205] PASSCODE
PASSCODE : 1234
PASSCODE : 1234
4. Press the right soft key to return to
step 2 OR press TRSF to store and exit
programming OR press SPK to
store and advance to the next program
programming OR press SPK to
store and advance to the next program
DEFAULT DATA: ALL STATION PASSCODES = 1234
PROGRAM STATION NAMES
This program is used to assign a character name or identification for each exten-
sion. You may assign a name of 11 characters long.
sion. You may assign a name of 11 characters long.
PROGRAM KEYS
UP & DOWN - Used to scroll and move cursor.
KEYPAD - Used to enter characters.
HOLD - Press to clear entry.
KEYPAD - Used to enter characters.
HOLD - Press to clear entry.
Open customer programming and follow the instructions below.
ACTION
DISPLAY
1. Press TRSF and then dial 104
[201] STN NAME
Display shows
2. Dial station number (e.g., 205)
[205] STN NAME
OR press UP or DOWN to select the
station and press the right soft key to
move the cursor
station and press the right soft key to
move the cursor
3. Enter the station name using the
[205] STN NAME
procedure described on the next page
SAM SMITH
and press the right soft key to return to
step 2
step 2
System_Administration_Guide.qxp 4/30/2007 12:56 PM Page 20