ZyXEL Communications P-2304R-P1 Series User Manual

Chapter 12 Firewall

P-2304R-P1 Series User’s Guide

Use this screen to enable service blocking, to set up the date and time service blocking is 
effective, and to maintain the list of services you want to block. To access this screen, click 
Security > Firewall > Services.

Figure 73   Security > Firewall > Services

Each field is described in the following table.

Packet Direction

This field displays each direction that packets pass through the ZyXEL Device.

Log

Select the situations in which you want to create log entries for firewall events.
No Log - do not create any log entries
Log Blocked - (LAN to WAN only) create log entries when packets are blocked
Log Forwarded - (WAN to LAN only) create log entries when packets are 

forwarded
Log All - create log entries for every packet

Apply

Click this to save your changes and to apply them to the ZyXEL Device.

Reset

Click this to set every field in this screen to its last-saved value.

Table 58   Security > Firewall > General

Table 59   Security > Firewall > Services

Service Setup

Enable Services 

Blocking

Select this to activate service blocking. The Schedule to Block section controls 

what days and what times service blocking is actually effective, however.