ZyXEL Communications P-2304R-P1 Series User Manual

Chapter 16 Remote MGMT

P-2304R-P1 Series User’s Guide

Figure 88   Management > Remote MGMT > SNMP

Each field is described in the following table.

Table 78   Management > Remote MGMT > SNMP

SNMP 

Configuration

Get Community

Enter the Get Community, which is the password for the incoming Get and 

GetNext requests from the management station. The default is public and allows 

all requests.

Set Community

Enter the Set community, which is the password for incoming Set requests from 

the management station. The default is public and allows all requests.

Trap

Community

Type the trap community, which is the password sent with each trap to the SNMP 

manager. The default is public and allows all requests.

Destination

Type the IP address of the station to send your SNMP traps to.

SNMP

Server Port

Enter the port number this service can use to access the ZyXEL Device. The 

computer must use the same port number.

Server Access

Select the interface(s) through which a computer may access the ZyXEL Device 

using this service.

Secured Client IP 

Address

Select All to allow any computer to access the ZyXEL Device using this service.
Select Selected to only allow the computer with the IP address that you specify to 

access the ZyXEL Device using this service.

Apply

Click this to save your changes and to apply them to the ZyXEL Device.

Reset

Click this to set every field in this screen to its last-saved value.