ZyXEL Communications P-2304R-P1 Series User Manual

Chapter 4 Wizard Setup

P-2304R-P1 Series User’s Guide

The following table describes the labels in this screen.

Figure 23   Connection Wizard > MAC Address

Table 17   Connection Wizard > IP Address (PPPoE)

My WAN IP 

Address

Enter the IP address provided by your ISP.

First DNS Server
Second DNS 

Server
Third DNS Server

Select From ISP if your ISP dynamically assigns DNS server information. (In this 

case, the ISP assigns the WAN IP address too. See Network > WAN > Internet 

Connection.) The field to the right is read-only, and it displays the IP address 

provided by your ISP.
Select User-Defined if you have the IP address of a DNS server. You might get it 

from your ISP or from your network. Enter the IP address in the field to the right.
Select None if you do not want to use this DNS server. If you select None for all of 

the DNS servers, you must use IP addresses to configure the ZyXEL Device and 

to access the Internet.

< Back

Click this to go to the previous screen.

Next >

Click this to go to the next screen.

Exit

Click this to close this screen and return to the main screen.