ZyXEL Communications P-2304R-P1 Series User Manual

 Chapter 7 LAN

P-2304R-P1 Series User’s Guide

Use this screen to add subnets on the LAN port. You can also control what routing information 
is sent and received by each subnet. To access this screen, click Network > LAN > 
Advanced.

Figure 46   Network > LAN > Advanced

Each field is described in the following table.

RIP Version

Select which version of RIP the ZyXEL Device uses when it sends or receives 

information on the subnet.
RIP-1 - The ZyXEL Device uses RIPv1 to exchange routing information.
RIP-2B - The ZyXEL Device broadcasts RIPv2 to exchange routing information.
RIP-2M - The ZyXEL Device multicasts RIPv2 to exchange routing information.

Apply

Click this to save your changes and to apply them to the ZyXEL Device.

Reset

Click this to set every field in this screen to its last-saved value.

Table 39   Network > LAN > IP Alias

Table 40   Network > LAN > Advanced

RIP & Multicast 

Setup

RIP Direction

Use this field to control how much routing information the ZyXEL Device sends 

and receives on the subnet.
None - The ZyXEL Device does not send or receive routing information on the 

subnet.
Both - The ZyXEL Device sends and receives routing information on the subnet.
In Only - The ZyXEL Device only receives routing information on the subnet.
Out Only - The ZyXEL Device only sends routing information on the subnet.

RIP Version

Select which version of RIP the ZyXEL Device uses when it sends or receives 

information on the subnet.
RIP-1 - The ZyXEL Device uses RIPv1 to exchange routing information.
RIP-2B - The ZyXEL Device broadcasts RIPv2 to exchange routing information.
RIP-2M - The ZyXEL Device multicasts RIPv2 to exchange routing information.