Avaya 1220 User Manual

Attach the foot stand in the appropriate slots depending on the desired 
angle for your Avaya 1220 IP Deskphone. If you insert the foot stand into 
the upper slots, your IP Deskphone sits at a 25-degree angle. If you insert 
the foot stand into the lower slots, your IP Deskphone sits at a 55-degree 
angle.

If you install your IP Deskphone on a wall, do not attach the foot stand.

1.

Align the bottom tabs on the foot stand with the position 1 slots or the 
position 2 slots on the back of your IP Deskphone.
In position 1 the IP Deskphone sits at a 25-degree angle.
In position 2 the IP Deskphone sits at a 55-degree angle.

 shows the slots on the back of the 

IP Deskphone.

2.

Press the foot stand into the slots until it snaps into place.

Use the following procedure to connect the handset to the 
Avaya 1220 IP Deskphone.

1.

Plug the end of the handset cord with the short straight section into 
the handset.

2.

Plug the other end of the handset cord with the long straight section 
into the handset jack marked with the 

+

 symbol on the back of the 

IP Deskphone.

3.

(Optional) Thread the cord through the channel in the foot stand (if 
installed) so that it exits on the side of the foot stand.

 shows the connections on the back of the Avaya 

1220 IP Deskphone.