AT&T 2402 User Manual
R E G I S T E R T H E H A N D S E T
1
Make sure to charge the handset battery pack at least 12 hours.
2
At the 2462 corded base, press
.
3
Use
or
to select
DISPLAY BASE-ID.
4
Press
. The base screen will display the 15-digit Base ID code
for about 30 seconds, then return to the idle screen. Write down the
Base ID code so you can enter it at the handset in
Base ID code so you can enter it at the handset in
STEP 6 below.
5
At the cordless handset, use the softkey to select
REGISTER.
6
Enter the 15-digit Base ID code.
7
Use the softkey to select OK. The screen displays
PLEASE WAIT!!.
8
After about 45 seconds, the screen displays
FOUND BASE. If the
handset displays
BASE BUSY TRY LATER, the base is in use.
For complete operation instructions,
refer to the manual that came with
your original handset.
OK
MENU
3
2402_map_2ATT 5/7/02 6:32 PM Page 3