AT&T 1040 User Manual
12
Telephone operation
Basic phone operation
Switching among handset, speakerphone and
headset mode
headset mode
To switch from handset to headset or
speakerphone, press [HEADSET] or [ SPEAKER],
then replace the handset. (In order to use the
headset, it must be plugged in.)
speakerphone, press [HEADSET] or [ SPEAKER],
then replace the handset. (In order to use the
headset, it must be plugged in.)
To switch from speakerphone to handset, lift the
handset. (Do not press
handset. (Do not press
[ SPEAKER] or the call
will be disconnected.)
To switch from speakerphone to headset, insert
the headset plug into the jack on the side of the
telephone base, and press
the headset plug into the jack on the side of the
telephone base, and press
[HEADSET].
To switch from headset to handset when
the handset is in the telephone base, lift the
handset.
the handset is in the telephone base, lift the
handset.
To switch from headset to handset when the
handset is off-hook, press [HEADSET] again.
handset is off-hook, press [HEADSET] again.
To switch from headset to speakerphone, press
[ SPEAKER].
[ SPEAKER].
To override automatic line selection, press
and release a line button. This activates
the speakerphone or headset, whichever is
programmed as the default mode.
and release a line button. This activates
the speakerphone or headset, whichever is
programmed as the default mode.
Timer
When you make or answer a call, the timer
automatically starts. The screen displays the
elapsed time in minutes and seconds for the
first hour (up to 59:59) and then begins again.
The timer stops automatically when you hang up
and the recorded time is displayed for about 10
seconds. The timer also stops when you place a
call on hold and resets to 00:00 when you release
the hold.
automatically starts. The screen displays the
elapsed time in minutes and seconds for the
first hour (up to 59:59) and then begins again.
The timer stops automatically when you hang up
and the recorded time is displayed for about 10
seconds. The timer also stops when you place a
call on hold and resets to 00:00 when you release
the hold.
10:01AM 11/23
00:30
5550100
00:30
5550100