Avanti 3025 User Manual

Page of 52
Avanti 3025 set
35
As shown in the above table, you press the dialpad button 
once for the first letter appearing on it, twice for the second 
letter appearing on it, and three times for the third letter 
appearing on it. With each press of the button, the corre-
sponding character appears on the display. If you want to 
enter two characters from the same button on the dialpad, 
for example D followed by E, wait two seconds between 
entering characters (until you see the cursor “_” at the next 
position), or press  [NEXT] (if programmed) to enter to the 
next character.
Enter “Z” by pressing [9] four times.
Enter “Q” by pressing [7] two times.
Enter an underline by pressing [1] twice.
Enter a slash by pressing [1] four times.
Warning signal
You hear a three-beep warning tone:
If you try to access a Phone Book list that you are not 
authorized to use;
If you try to save a name without entering a number for it; 
If you try to add a new name to your private list when 
you have no available speed dial bins; or
If you try to access a list that has no names defined.
Caller ID
If you receive a private call made from a telephone number 
that appears in your Phone Book, and if your system sup-
ports Caller ID, the name programmed for that number in 
the Phone Book appears on your telephone display, 
instead of the number.
Avanti3025_cov.book  Page 35  Tuesday, August 3, 1999  8:12 AM