Specialized CR2032 User Manual
called the odometer mode). Note: if
your display says TRIP, press the "SET"
button once to change to ODO. Next,
hold down the "SET" button for three
seconds. The "Km" or "m" indicator
will begin blinking. You may now alter-
nate between miles and kilometers by
pressing the "MODE" button. When
the correct choice is flashing, select it
your display says TRIP, press the "SET"
button once to change to ODO. Next,
hold down the "SET" button for three
seconds. The "Km" or "m" indicator
will begin blinking. You may now alter-
nate between miles and kilometers by
pressing the "MODE" button. When
the correct choice is flashing, select it
by pressing the "SET" button. You will
now enter the "Programmable
Odometer" mode. If the odometer set-
ting is correct push the "SET" button
five times to exit odometer mode.
(Otherwise, see "Setting the program-
mable odometer" below).
Note
now enter the "Programmable
Odometer" mode. If the odometer set-
ting is correct push the "SET" button
five times to exit odometer mode.
(Otherwise, see "Setting the program-
mable odometer" below).
Note
: The Speed Indication Bezel will
indicate 0-45MPH on SpeedZone Pro
computers purchased in the USA and
the U.K. and 0-90 Km/h on computers
purchased in all other countries.
Cyclists in the USA and the U.K . who
would like to display their speed and
distance data in kilometers will have to
multiply the value of the numbers on
the face of the bezel by two. For
example, if the Speed needle is point-
ing to the 20 on the bezel, your actual
speed is 40Km/h.
computers purchased in the USA and
the U.K. and 0-90 Km/h on computers
purchased in all other countries.
Cyclists in the USA and the U.K . who
would like to display their speed and
distance data in kilometers will have to
multiply the value of the numbers on
the face of the bezel by two. For
example, if the Speed needle is point-
ing to the 20 on the bezel, your actual
speed is 40Km/h.
13
lines the mode/side-mode sequence.
Once a particular mode has been
entered, its values can be reset or
adjusted by pressing and holding the
"SET " button for three seconds. Some
operations may require that you use a
combination of the "MODE" and
"SET" and "TOP" buttons.
Once a particular mode has been
entered, its values can be reset or
adjusted by pressing and holding the
"SET " button for three seconds. Some
operations may require that you use a
combination of the "MODE" and
"SET" and "TOP" buttons.
1. Setting the Display Language
Your SpeedZone ® Pro can display
information on the dot-matrix display
area in six different languages:
English (ENGL), German (GER),
French (FR), Italian (ITA), Dutch (NED),
and Spanish (ESP). To select your lan-
guage, depress hold the "MODE",
"SET" and "TOP" buttons simultane-
ously for three seconds. The selected
language will be displayed. Use the
Your SpeedZone ® Pro can display
information on the dot-matrix display
area in six different languages:
English (ENGL), German (GER),
French (FR), Italian (ITA), Dutch (NED),
and Spanish (ESP). To select your lan-
guage, depress hold the "MODE",
"SET" and "TOP" buttons simultane-
ously for three seconds. The selected
language will be displayed. Use the
"MODE" button to scroll through the
languages. When the selected lan-
guage is displayed (default language
is English), press the "SET" button
once to confirm your selection and exit
display language mode.
languages. When the selected lan-
guage is displayed (default language
is English), press the "SET" button
once to confirm your selection and exit
display language mode.
2. Miles or Kilometers selection
(English only)
Your SpeedZone® Pro will record dis-
tance and speed in either miles (m &
m/h) or kilometers (K & Km/h). Please
note that miles can only be selected
when the language setting is English.
All other languages display only kilo-
meters. (See "Setting the Display
Language" above). To enter your selec-
tion of miles or kilometers, push the
"MODE" button until ODO appears on
the left side of the display (This is
tance and speed in either miles (m &
m/h) or kilometers (K & Km/h). Please
note that miles can only be selected
when the language setting is English.
All other languages display only kilo-
meters. (See "Setting the Display
Language" above). To enter your selec-
tion of miles or kilometers, push the
"MODE" button until ODO appears on
the left side of the display (This is
12
Km/h
FIGURE 10. ODOMETER SCREEN