Lg Electronics AN110B-JD User Manual

Connection

23

Connecting to a Video Source

a. Connect the Video input jacks of the projector to the

output jacks of the A/V source with Video cable. 

b. Connect the S-Video input jack of the projector to the 

S-Video output jack of an A/V source with an S-Video
cable.

* You can get better picture quality when connecting 

S-Video source to the projector.

* You can connect a VTR, a camcorder, a LDP or any other compatible video image source to the projector.

<VCR>

Connecting to a DVD

a. Connect the DVD Component cable to the 

RCA to D-Sub Adaptor and then connect the 
RCA to D-Sub Adaptor to RGB Input 
(PC/DTV) of the projector. 

* When connecting the component cable, match the 

jack colors with the component cable.(Y=green, 
P

B

=blue, P

R

=red)

b. If the DVD has HDMI output, connect HDMI 

cable to HDMI Input of the projector.

c. If the DVD has DVI output, connect HDMI to 

DVI cable to HDMI Input of the projector.

* If connecting the HDMI, audio is not supported.

d. Use a DVD with Component 480i(576i)/

480p(576p)/720p/1080i mode.

PR

PB

Y

* The output jacks (Y, P

B

, P

R

) of the DVD might be labelled as Y, Pb, Pr / Y, B-Y, R-Y / Y, Cb, Cr according to the equipment.

<DVD>

RCA to D-Sub Adaptor

Component cable

HDMI to DVI cable

HDMI cable